Sponsored
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
32
Reaction score
30
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
I have the sway bar disconnect and I’m hearing if you do a lift the drive shaft hits the sway bar. Do you know if this is true?
This is not something we have experienced. Also, keep in mind that not all lifts are the same and lift the vehicle in different ways
Sponsored

 

Dr.Tron

Member
First Name
Kevin
Joined
Jun 22, 2024
Threads
2
Messages
13
Reaction score
8
Location
Salt Lake City, UT
Vehicle(s)
2024 Tacoma Trailhunter
We finally tested it, and as suspected it fits fine. You just have to remove the factory spring seat with the hydrobump provision.

Our next run of spring spacers will be including a provision for hydrobumps as well so you get the lift without sacrificing function.

Hydrobump.jpg
When do you plan to have the updated 2" spacers that work with the factory spring seat hydro bump provision on the Trailhunters?

What front lift components are compatible with the trailhunter's OME supsension?
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
32
Reaction score
30
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
When do you plan to have the updated 2" spacers that work with the factory spring seat hydro bump provision on the Trailhunters?

What front lift components are compatible with the trailhunter's OME supsension?
Probably in the next 3 weeks or so. Going forward, all of our 1" and 2" spring seat spacers will have this provision.

Our TrailHunter specific top spacer is what we recommend for the TrailHunter
 

RESQCAT

Well-known member
First Name
Dennis
Joined
Jul 27, 2024
Threads
1
Messages
59
Reaction score
28
Location
North Bend, WA
Vehicle(s)
2024 Toyota Tacoma Trailhunter, 2000 Jeep Grand Cherokee (very modified!)
Please provide part numbers specific to the spacers for the Trailhunter..
 

Sponsored

RESQCAT

Well-known member
First Name
Dennis
Joined
Jul 27, 2024
Threads
1
Messages
59
Reaction score
28
Location
North Bend, WA
Vehicle(s)
2024 Toyota Tacoma Trailhunter, 2000 Jeep Grand Cherokee (very modified!)

Iqudayo

Member
First Name
Tony
Joined
Aug 1, 2024
Threads
5
Messages
14
Reaction score
23
Location
Florida
Vehicle(s)
2024 Toyota Tacoma
I am in Florida, am I safe to assume b not being near you we can not do any testing for you. Looking to level 2” front and level the back.
2024 Tacoma TRD Sport 6 Speed Manual trans
 

Sponsored

4GTD

New member
Joined
Sep 13, 2024
Threads
0
Messages
4
Reaction score
0
Location
Detroit, MI
Vehicle(s)
2024 Tacoma TRD Off Road
@Peak Suspension Does your team have any photos of the top mount spacer from the top prior to the assembly installed onto a truck?

I ask because I'm curious if this spacer would inherently act as both a lift, and way to support/brace the OE top hat from failing due to the design of the cast "cap" retaining the upper shock bushing.

Entertaining the idea (if its necessary to prevent top hat failures) of running the Peak rear spacers (1" lift), front lower spring spacer (1" lift), and a TheTacoGarage billet strut reinforcement plate (1" lift).
On paper that would result in a 2" lift in the front and a 1" lift at the rear.
 
Last edited:

drabon74

Active member
First Name
DR
Joined
Mar 13, 2024
Threads
5
Messages
39
Reaction score
21
Location
Aynor, SC
Vehicle(s)
2021 4-Runner
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
32
Reaction score
30
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
I just need a small front lift and think this is the ticket. does the 1 inch top spacer require the top hat be removed from the strut or does it just simply fit on top? If I’m seeing this right it’s the easy way to go.

It installs right on top of the strut
 
 



Top