Isn’t the wolf box just a digital review mirror/dash cam and not an actual camera relocation kit?
Since the Trailhunter has a digital rear view mirror already (similar to wolf box) I was simply looking for a way to not lose the view from the mirror when I added the Lone Peak. If wolfbox has a...
Love them. Not bouncy at all, rides great, height is perfect. We did our first camp last weekend with all the new gear including the Dobinson's and it performed flawlessly with little to no sag. I have a couple pics below of the truck so you can get an idea of ride height in the back loaded up...
So LP didn't not wire the 3rd brake light. I had Juniper Overland here in Denver do all my interior buildout of electronics, water tank/pump, other lighting, etc so I asked if they would wire it and also mound my GG Offroad camera relocation. They did all that. The camera relocation already had...
Ahhh gotcha, thanks. I will try that out.
Since there is already a cutout on the exterior of the truck for the RAI I wouldn't mind either keeping it or getting a true snorkel *if there was a way for it to remain functional while dramatically reducing the noise. I am assuming the aftermarket is...
So to access the rubber plug do I pull the cap off the bottom of the RAI on the exterior and access from there? In other words the piece that was apparently the hold up for QC issues. Or is that done under the hood? I'll take a look when I get the truck back this afternoon as well.
The shop removed part of the crash pad. Trimming wise it was literally a few slivers. He showed me the trimmings and it was almost comical. If you turn the steering wheel all the way one direction you'll see where it is closest to the painted part of the bumper. That is where they trimmed. You...
My Trailhunter is getting Dobinson's installed as we speak and I get it back tomorrow. I figure that I'm sitting at about ~800 pounds now before loading up the drawers so I went with the heaviest one that is meant for 800 - 1200. I will post some details when I get it back, likely early next...
You don't happen to have any pics of what you did do you? I honestly have no idea how the intake works and don't currently have the truck to mess with while it gets the springs installed. I assume RAI is short raised air intake? In doing that is that not impacting the air flow? Again, pardon my...
Just got the truck back from Juniper today and it goes in tomorrow to get Dobinsons installed. It drives good now, just a decent about of sag. I am going to post more details and pics once I get them installed including measurements of the space between the tire and body.
We have our first...
I love it so far. I had planned on an SP and actually found LP from someone that posted on here and started researching. I like the design better that GFC and SP. It’s so roomy inside. There are a few minor build quality differences where SP specifically is ahead but not in any meaningful way...
Yeah guessing they just hadn’t updated the site yet. 4th gen is definitely available and they’ve built at least two so far. Same price as all other models. $6k + whatever addons you get. If you do an order let me know and I can get you an extra $250 off I believe. My buddy is one of their brand...
I made a reminder to check when I get the truck back but remind me if you haven’t heard back by next Wednesday and I’ll check for you. It’s been in a series of shops getting built the let few weeks and I’m getting it back next week.
Haha thanks and will do! If you follow either Air Down Gear Up or Juniper on IG they are posting reels fairly regularly. There is one that I just saw this morning Juniper just posted. The Juniper work should be done by the end of the week.
I am not sure to be honest. I don't use the regular radio or navigation. I use Car Play exclusively for navigation and music. The truck does announce you as you cross state lines ("welcome to Washington") and on our trip out to get the LP and back it was still very accurate. That would be using...
Falken Wildpeak AT4 and it still drives and performs amazing! I really don’t think there is much if any safety reduction. I don’t think Toyota would allow it to be so easily removed if that was the case. It’s basically the same thing as doing a body mount chop on 2nd and 3rd gens which literally...
I have 295 x 70 x 18 and it required very minor modifications to fit. Part of the crash pad was removed, very small amount of trimming, small fender felt removed. Stock suspension and wheels. I’m not sure why you are looking for zero modifications but if you saw the small amount that had to be...
I am selling the tires that came off of my Trailhunter. The 4 main tires have about 1,000 miles on them only from the trip back from IA to Denver before I swapped them for larger tires. The spare is still brand new.
If you are interested please shoot me a direct message. I am located in the...