18" Method 320 (+18 offset) bronze wheels + Wildpeak 275/70R18 on Underground TRD Off-Road Premium

[Rellims]

First time off pavement, worked as advertised.

 

[4R4Life]

Hi was planning to buy Method wheels. i am wondering if the lug nuts size of the method wheels compatible with the 6gen Toyota4runner? Thank you

 

[Rellims]

Hi was planning to buy Method wheels. i am wondering if the lug nuts size of the method wheels compatible with the 6gen Toyota4runner? Thank you

Unsure how to answer this, the methods are on my 6g, so yes. The brand of lug is gorilla if that helps.

 

[zgreen]

First time off pavement, worked as advertised.

How do you like the 3/4 ARB rack? Any wind noise?

 

[4R4Life]

Thanks, did you buy the lug nut separately or it come with the method wheels?

 

[Rellims]

How do you like the 3/4 ARB rack? Any wind noise?

It's good, haven't loaded anything on it yet but no noise. Did a 1000 mile road trip and no noise that bothered me.

 

[Rellims]

Thanks, did you buy the lug nut separately or it come with the method wheels?

They were separate.

 

[buhay4runner]

18" Method 320 (+18 offset) Bronze Wheels
Falken Wildpeak AT4 275/70/18
Factory suspension - no lift
Very slight rub - Pushed the liner in, no cut

2 cops pulled into the parking lot while I was taking pictures to check it out. Said it was the first one they saw live and they both had 5gens.

I'm thinking about getting the same rims. I also have the same color and car. So no lift at all? No rubbing? And you're able to mount 285/70? I'm thinking 285/65 or maybe 265. And 2 inches leveling kit install the front.

 

[buhay4runner]

I'm thinking about getting the same rims. I also have the same color and car. So no lift at all? No rubbing? And you're able to mount 285/70? I'm thinking 285/65 or maybe 265. And 2 inches leveling kit install the front.

Sorry, just saw the 275 and slight rubbing. But you don't have any lift kit correct? How bad is the rubbing?

 

[Rellims]

Sorry, just saw the 275 and slight rubbing. But you don't have any lift kit correct? How bad is the rubbing?

No lift kit, yet. Slight rubbing at full lock in the front. I just need to push that felt wheel well liner in about 1/2 in the front to be safe and it will be fine. I do plan on putting 2in lift on the front so it's fine for now. The back I did remove the part that gives more room there and there is +1 inche in the rear.

Front

Rear

 

[buhay4runner]

No lift kit, yet. Slight rubbing at full lock in the front. I just need to push that felt wheel well liner in about 1/2 in the front to be safe and it will be fine. I do plan on putting 2in lift on the front so it's fine for now. The back I did remove the part that gives more room there and there is +1 inche in the rear.

Front

Rear

I'm waiting for them come in. Still have time to decide on the tire size. But I also ordered a leveling kit from rough country. 1.5-2 inches. I think that should give a bit of some room. I read that you went on a trip 1k miles? No issues with 275? That's also one of my worries. Might be way too wide for a 9 inches width wheel. But dang! Yours looks fie though!!

 

[Rellims]

I'm waiting for them come in. Still have time to decide on the tire size. But I also ordered a leveling kit from rough country. 1.5-2 inches. I think that should give a bit of some room. I read that you went on a trip 1k miles? No issues with 275? That's also one of my worries. Might be way too wide for a 9 inches width wheel. But dang! Yours looks fie though!!

Yeah put like 1200 miles on them on a road trip 2 days after having them put on with no issues. I think with any lift they wouldn't rub at all. The rub is just at the very bottom of the fender liner. I do also think my +18 offset is causing the rub, others report with the stock +55 offset the same size tier has no rub.

 

[buhay4runner]

Yeah put like 1200 miles on them on a road trip 2 days after having them put on with no issues. I think with any lift they wouldn't rub at all. The rub is just at the very bottom of the fender liner. I do also think my +18 offset is causing the rub, others report with the stock +55 offset the same size tier has no rub.

To much to think about. Lol
Sorry, last question. What lug nut are you using?