DoorKnob4531
Member
- Thread starter
- #1
Installed the exhaust dump from At the Helm Fabrications. $95 bucks shipped.
1. Lower Spare Tire.
2. Remove the 2 14mm nuts from the existing exhaust system.
3. Put your jack under the trailer hitch mount to help raise the frame a little from the axel.
4. Carefully work out the old exhaust system from the two hangers and around the axel.
5. Lower the jack back down, you are finished with it.
6. Install the new exhaust dump onto the existing fitting reusing the two 14mm nuts.
Took me about 15 minutes by myself. Be safe!
1. Lower Spare Tire.
2. Remove the 2 14mm nuts from the existing exhaust system.
3. Put your jack under the trailer hitch mount to help raise the frame a little from the axel.
4. Carefully work out the old exhaust system from the two hangers and around the axel.
5. Lower the jack back down, you are finished with it.
6. Install the new exhaust dump onto the existing fitting reusing the two 14mm nuts.
Took me about 15 minutes by myself. Be safe!
Sponsored
