BeatSonic Differences

[diverjm]

Just wanted to let every one know I reached out to BeatSonic regarding the 3T3 vs the 2T3. The 3T3 has 5 more watts per channel vs the 2T3. It also has a line out converter ( RCA for signal and a remote wire that tells the amp when to turn on and off) that will allow an aftermarket amp and subwoofer setup. One thing you must have is a separate bass volume control for the added amp and subwoofer as the factory receiver will only adjust the bass volume of the existing speaker system. Most amps have an optional bass knob for this specific reason. Although the 3T3 is listed for non-JBL systems, they assured me both will work. For me it’s the perfect scenario as I want to add boost of sound now to the factory speakers and can add an external amp and subwoofer setup down the road for real bass.

Sponsored

 

[MT-Taco]

Great info!

 

[MERAKIAUTOWORKS]

Correct, they are supposed to do the 3T3 on my JBL 24 OR.

-Josh

 

[diverjm]

Correct, they are supposed to do the 3T3 on my JBL 24 OR.

-Josh

I’d love to hear once it’s completed. I’m curious what they set the front and rear gain levels to. I’m guessing it’ll be different than the 2T3 since the 3T3 has higher wattage. Would be nice if they did another YouTube install video with your specific setup since it’s the JBL w/ the 3T3.

Sponsored