- Joined
- Feb 10, 2024
- Threads
- 7
- Messages
- 69
- Reaction score
- 31
- Location
- Pittsburgh
- Vehicle(s)
- Subaru Outback
- Thread starter
- #1
Just FYI, was able to get an Extang Trifecta 2.0 Trifold cover. It was 479 and shipped from Real Truck. The directions and brackets are noted as 2024 Tacoma.
I don’t have much experience with this cover previously but here are my thoughts.
Saying this ‘fits’ the 2024 is a stretch at best. The back weather strip that is supposed to go on the back bed frame near the cab has weather stripping already attached from the factory. It BARELY touches and I mean barely like 1/16th inch coverage in spots. The front that says it should overlap the tailgate by 1-2 “fins” which guard against water infiltration etc barely touch and I doubt there is overlap. There is no wiggle room front to back to adjust. Move it forward and there would be gaps at the cab and move it back there would be gaps at the tailgate.
What does work is the bracket to attach to the bed. The topper attaches fine using the bed rails.
I will post pictures tomorrow but I really think they are pushing it saying this fits and I have real concerns on water tightness. Also the pre-installed weather strip is not straight and I can’t remove/replace it. So just a warning to everyone else. Yes it “fits” but it just by a hair. I plan on going past the truck shop who ordered it and ask their opinion on if it should be returned.
I don’t have much experience with this cover previously but here are my thoughts.
Saying this ‘fits’ the 2024 is a stretch at best. The back weather strip that is supposed to go on the back bed frame near the cab has weather stripping already attached from the factory. It BARELY touches and I mean barely like 1/16th inch coverage in spots. The front that says it should overlap the tailgate by 1-2 “fins” which guard against water infiltration etc barely touch and I doubt there is overlap. There is no wiggle room front to back to adjust. Move it forward and there would be gaps at the cab and move it back there would be gaps at the tailgate.
What does work is the bracket to attach to the bed. The topper attaches fine using the bed rails.
I will post pictures tomorrow but I really think they are pushing it saying this fits and I have real concerns on water tightness. Also the pre-installed weather strip is not straight and I can’t remove/replace it. So just a warning to everyone else. Yes it “fits” but it just by a hair. I plan on going past the truck shop who ordered it and ask their opinion on if it should be returned.
Sponsored