Photos: trailer hitch position holes (in hitch receiver)

[CATOY]

In these pictures, you can see the two different position holes for the trailer hitch in the receiver -- the threaded holes for aftermarket steps and bars and the tow hook mounts that will most likely make it easy to replace with an aftermarket tow hook that sticks out a little further than than the stock ones up front.

Sponsored

 

[jsuber]

What about the two holes on the hitch receiver. One up front which is furthest from driver passes through the hitch receiver. The second set of holes closest to driver do not pass through but would be a more secure location for a hitch loch and harder to hammer off. The holes just stop like the receiver has a sleeve in it. Any ideas why?