geonerdist
Well-known member
- First Name
- Curtis
- Joined
- Apr 5, 2024
- Threads
- 5
- Messages
- 67
- Reaction score
- 75
- Location
- Bozeman, MT
- Vehicle(s)
- 2024 Tacoma TRD Off Road/2007 Nissan Xterra
- Thread starter
- #1
I started shopping for a new vehicle to replace my 2007 Nissan Xterra with 165,000 miles a few months ago. She was still running strong but I felt like it was time. I've driven everything from the Ranger, Canyon, Colorado and even some full size pickups. I felt like that Ranger/Canyon/Colorado just did not have the interior space I wanted and needed. Then I remembered that the Tacoma got redesigned and went to my local dealer's website and it looked like they might have some on the lot. So I went down and drove one. I immediately fell in love. It solved all the weird annoyances I had with everything else I drove. A few days later I purchased a 2024 Tacoma TRD Off Road in Ice Cap with a 6' bed. Two weeks later took it to Moab and fell in love with it even more.
Current Mods
12v Fuse Blocks for Accessories (one always on and another with ignition only power)
2 Motorola XTL5000 Radios
Yaesu FT-8800 Ham Radio
WeBoost Drive Reach Cell Booster
Prinsu Pro Cab Rack (with antennas)
Tonneau Cover
Rago Fab Center Console Molle Panels
REDARC Tow Pro Elite Trailer Brake Controller
I ran two 6ga wires from the battery. They go to a circuit breaker and a Blue Sea Fuse Panel. Then wired up a relay that is triggered from an ignition fuse tap with provides power to the second fuse panel. I cut two pieces of HDPE that fit in the bottom of both sides of the storage box and everything is mounted to those. This leaves the driver side storage wide open for use. It's a snug fit haha.
Planned Mods
CBI Sliders (getting installed June 24th!)
Method MR703 in Bronze
Falken Wildpeak A/T4W in 285/70r17
Current Mods
12v Fuse Blocks for Accessories (one always on and another with ignition only power)
2 Motorola XTL5000 Radios
Yaesu FT-8800 Ham Radio
WeBoost Drive Reach Cell Booster
Prinsu Pro Cab Rack (with antennas)
Tonneau Cover
Rago Fab Center Console Molle Panels
REDARC Tow Pro Elite Trailer Brake Controller
I ran two 6ga wires from the battery. They go to a circuit breaker and a Blue Sea Fuse Panel. Then wired up a relay that is triggered from an ignition fuse tap with provides power to the second fuse panel. I cut two pieces of HDPE that fit in the bottom of both sides of the storage box and everything is mounted to those. This leaves the driver side storage wide open for use. It's a snug fit haha.
Planned Mods
CBI Sliders (getting installed June 24th!)
Method MR703 in Bronze
Falken Wildpeak A/T4W in 285/70r17
Sponsored
Last edited: