DIY PPF

[Powhunter]

Im wondering how well it would turn out since the fenders on the pro are somewhat different. I just need the part above the downward curve.

I wasn’t aware that the fenders themselves were different, only the flares.

Sponsored

 

[WhiteLightning]

I did 6” on the bottom of the doors and everything was fine there. It’s not a super high danger area anyway. I’m just probably going to redo the fender area. I definitely got the worst area but still had some chips. The painted flares on the Pro are going to get beat to hell so you might want to consider that area as well.

The area Im talking about is the wide body on top of the fenders, not the black painted fenders themselves.

 

[Powhunter]

The area Im talking about is the wide body on top of the fenders, not the black painted fenders themselves.

Yeah I’m thinking of covering that whole area the next time I do it. I’m going to get some paper and try to cut into a shape that would work and then trace it onto a 12” PPF strip.

 

[WhiteLightning]

Yeah I’m thinking of covering that whole area the next time I do it. I’m going to get some paper and try to cut into a shape that would work and then trace it onto a 12” PPF strip.

Yeah thats prolly how I will do it. I have never done it before.

 

[Ron]

Yeah I’m thinking of covering that whole area the next time I do it. I’m going to get some paper and try to cut into a shape that would work and then trace it onto a 12” PPF strip.

Wet paper will stick and hold the contours better. I did that for the door handle pockets.

I was planning on using 6" for that spot. Hope its wide enough...

Sponsored