Search results

For the TRD Off Road with the Premium (I.e. powered tailgate) it was AK050

Thanks, that helps for AK010. I'm wondering then if AK0450 is with power tailgate or if it's for Pro?

I broke my left tail light and was looking up the part for an TRD Off Road and there are 3 variants. Anyone know hiw to tell them apart? 81560-AK010 81560-AK040 81560-AK050 Parts diagram shows them all the same…

Where? I didn’t find it in the manual

I chalk tested my Toyo Open Country P285/70R17 tires. The “calculator” said it would be 26 psi from the stock 30 in the increased size. My chalk test showed 33 front and 26 rear with an empty bed. Just wanted to share.

What's the thickness of the OEM bed mat? With the OEM tonneau cover relocating the rails down, which moves the bed divider down I only have about 3/4" from the top of the ridge to the bottom of the bed divider.

What is the thickness? I’m trying to see if it’ll fit between under the cargo divider (stock, but lowered)

What’s the difference in ride quality for those that have gone to the 285/70R17 or 295/70R17 vs. the stock 265/70R17 (TRD OR)? The ride quality stock is really great and I wouldn’t want to sacrifice too much. My head says to stick with 285/70R17 Load Range C to minimize impact to the ride quality.

What’s the largest diameter tire mounted on the donut that fits? I’d even be ok with airing it down slightly. Right now I was planning on using a 235/85R17 on the donut. This is the same diameter as a 285/70R17. I’d like to use a 295/70R17, but not sure there is room to fit a 255/80R17 on the...

I think I might go with the 285/70R17 but use a 235/85R17 for the spare. I’m ok with the “donut” to keep it small. But good to know that circumference works.

what did you do for the spare?

Surprisingly that worked, thanks! If it keeps coming back I'll play with the top mount and see if I can level the two linear actuators. It's two bolts to take off the tail lights and then gives access to the Torx screws at the top which I assume lets you adjust it a little. Didn't see any...

Well, maybe can just return it?

My Power tailgate worked fine when I picked it up last week. However, now it goes down and if I try to put it up it beeps twice at me. I tried unplugging it to no avail. Is there a sensor in there that has to be aligned before it goes back up? I can take to dealer, but kills a few hours. Thought...

Well, I blew $100 on it. It’s taller than the stock, much bigger and uncomfortable. Installed it for about 5 seconds and tossed it in the glovebox to give to anyone who wants it.

Is the MT TRD shift knob shorter than the stock one?