30mm offset (17x7.5 + 285/70) - how much poke?

[TuesdayTacoTruck]

How much do you think a 30mm offset 17in x 7.5in with 285/70r/17 will poke out from the Rim on a 2024 trd off road?

Sponsored

 

[TuesdayTacoTruck]

My bad 235/70r/17 Will that even look decent? Trying to achieve a slight poke like a 38mm but can't find a decent rim option.

 

[StreeTaco]

What is stock offset and wheel width?

 

[MT-Taco]

Factory OR offset is +55mm. So that will move the wheels out 25mm. I’m thinking you’ll have about 5-10mm of poke? But damn 235’s! That’s probably not going to look good in any way on an OR!

 

[MT-Taco]

Method makes +35, SCS makes +20, RRW makes +25 to +18. I’ve seen a +38 somewhere but can’t remember? Someone will chime in?

 

[tacorancher]

I’ve got a similar question - I am going to run two different sets of wheels for different applications. Currently running Wildpeak 275/70/18 on the TH wheels (I think +25 offset but I can never remember). The wildpeaks have the perfect poke on this setup but they run incredibly wide for a 275.

I want to also run 285/70/17s and want to get the same level of poke on those - interested in bronze methods - anyone know what offset I should run? +30?

 

[Semi Pro]

I have Method 703 wheels with +35 offset and 285/70/17 KO3’s.
It’s fantastic with only tire shoulder poke.
I wouldn’t be afraid of +25 either.

 

[tacorancher]

I have Method 703 wheels with +35 offset and 285/70/17 KO3’s.
It’s fantastic with only tire shoulder poke.
I wouldn’t be afraid of +25 either.

Tire shoulder is exactly what I’m getting on stock TH wheels with 275/70/18 Falkens and it’s perfect. Will snap a picture.

 

[rkohlerbend]

Here's a calculator:

https://tiresize.com/wheel-offset-calculator/

 

[tacorancher]

Here's a calculator:

https://tiresize.com/wheel-offset-calculator/

That helps. I think +30 gives me almost the same poke based on actual manufacturer dimensions.

 

[rkohlerbend]

That helps. I think +30 gives me almost the same poke based on actual manufacturer dimensions.

It doesn't tell you whether the tires will rub though.

 

[TuesdayTacoTruck]

What is stock offset and wheel width?

stock is +55mm offset

 

[TuesdayTacoTruck]

Factory OR offset is +55mm. So that will move the wheels out 25mm. I’m thinking you’ll have about 5-10mm of poke? But damn 235’s! That’s probably not going to look good in any way on an OR!

Yea a 235 mifht be a little too skinny for my taste

 

[StreeTaco]

Width comes into play here

 

[tacorancher]

Width comes into play here

Width matters as much as length.

Sponsored