- Thread starter
- #1
*Update to this post*
Cali Raised contacted me and offered to ship me out a new pair of sliders that fit properly, along with a $100 gift card to their store. This is great customer service, and I really appreciate them doing that. They also offered a partial refund of $250 dollars and a $100 store gift card, which is what I opted for.
I feel great about all of this now, and by writing this, I hope that anyone following along will see that this is a company that does in fact care about their customers and their products. I look forward to purchasing more parts from them for my truck, and I hope that you will also.
I ordered these Trail Edition sliders on April 11th, noting their 4-6 week lead time. I received them about 2 1/2 months later. I'm not here to harp on that, but I feel it's important to mention, just to put things into context. I wanted to be patient with them, because I wanted a good product for my truck.
When they arrived, I was very happy. A quick visual inspection showed clean welds, and a powder coat type that is reminiscent of grip tape that skateboards use.
I set about installing these on Saturday, by myself, with a couple of jack stands to hold them in place. Needless to say this was difficult, these things don't balance very well, and simply trying to move the stands around to align them would cause the sliders to fall off. I ended up recruiting a friend to help me stab the sliders into place, and throw a couple of bolts in to hold them.
If only it were that simple, the holes in the sliders did not line up with the holes in the truck frame. They were close, but close is meaningless when you can't get bolts through. So I sat on my ass in my driveway, with a die grinder, opening holes up by hand and lifting the sliders into place to check and see if the bolts would go through. This took most of the day, and it was a pain in the ass.
I even had a come along thrown around my rear end, and attached to the slider in hopes of forcing the holes to line up, but it was futile. There were 6 or 7 holes that needed to be opened up, on both sides, but the drivers side slider was the worst. You know, I'm 55 and have worked on a lot of different vehicles, and I know shit like this can happen, but it's really a bummer on a $1200 dollar product that you waited months to receive.
So what do I think of the sliders now that they're on? They're burly, and are absolutely necessary for Crossbar Ranch, which is where I do much of my off roading, the place is a giant rock garden, where skids and sliders get absolutely used. These sliders can for sure hold the weight of the truck, and speaking of weight, you will notice it once they are mounted. They're heavy.
Here are a couple crappy cell phone pics of the sliders.
Cali Raised contacted me and offered to ship me out a new pair of sliders that fit properly, along with a $100 gift card to their store. This is great customer service, and I really appreciate them doing that. They also offered a partial refund of $250 dollars and a $100 store gift card, which is what I opted for.
I feel great about all of this now, and by writing this, I hope that anyone following along will see that this is a company that does in fact care about their customers and their products. I look forward to purchasing more parts from them for my truck, and I hope that you will also.
I ordered these Trail Edition sliders on April 11th, noting their 4-6 week lead time. I received them about 2 1/2 months later. I'm not here to harp on that, but I feel it's important to mention, just to put things into context. I wanted to be patient with them, because I wanted a good product for my truck.
When they arrived, I was very happy. A quick visual inspection showed clean welds, and a powder coat type that is reminiscent of grip tape that skateboards use.
I set about installing these on Saturday, by myself, with a couple of jack stands to hold them in place. Needless to say this was difficult, these things don't balance very well, and simply trying to move the stands around to align them would cause the sliders to fall off. I ended up recruiting a friend to help me stab the sliders into place, and throw a couple of bolts in to hold them.
If only it were that simple, the holes in the sliders did not line up with the holes in the truck frame. They were close, but close is meaningless when you can't get bolts through. So I sat on my ass in my driveway, with a die grinder, opening holes up by hand and lifting the sliders into place to check and see if the bolts would go through. This took most of the day, and it was a pain in the ass.
I even had a come along thrown around my rear end, and attached to the slider in hopes of forcing the holes to line up, but it was futile. There were 6 or 7 holes that needed to be opened up, on both sides, but the drivers side slider was the worst. You know, I'm 55 and have worked on a lot of different vehicles, and I know shit like this can happen, but it's really a bummer on a $1200 dollar product that you waited months to receive.
So what do I think of the sliders now that they're on? They're burly, and are absolutely necessary for Crossbar Ranch, which is where I do much of my off roading, the place is a giant rock garden, where skids and sliders get absolutely used. These sliders can for sure hold the weight of the truck, and speaking of weight, you will notice it once they are mounted. They're heavy.
Here are a couple crappy cell phone pics of the sliders.
Sponsored
Last edited:
