Underground 2024 Tacoma Build: Kuat Ibex Bed Rack, 17" ICON Neuvo Wheels, 285/70 AMP Terrain Attack R/T Tires

[Wukong]

Underground 2024 Tacoma SR5 build.

Build specs:

Wheels
Icon Vehicle Dyanmics Nuevo Wheels
17x8.5"
0 offset
Polished finish

Tires
AMP Terrain Attack R/T tires
285/70

Rack
Kuat Ibex Tuck Bed Rack

Not my truck btw.

Sponsored

 

[Visa_Declined]

Has anyone seen any pics of a 4th gen, with aftermarket wheels that don't have 50% of the tire hanging outside of the fender? I'm currently wheel shopping and have no idea what to buy.

 

[Visa_Declined]

Also, ouch.

 

[Wukong]

I saw that too but think that might just be the reflection of the person taking the photo?

 

[Visa_Declined]

I saw that too but think that might just be the reflection of the person taking the photo?

Looks like damage to me, but I could be wrong.

*edit*
Now that I'm home on my big monitor you are absolutely correct.

 

[jside86]

Underground 2024 Tacoma SR5 build.

Build specs:

Wheels
Icon Vehicle Dyanmics Nuevo Wheels
17x8.5"
0 offset
Polished finish

Tires
AMP Terrain Attack R/T tires
285/70

Rack
Kuat Ibex Tuck Bed Rack

Not my truck btw.

This is a nice setup!

Is there any way to install a tonneau cover with a rack like this?

I will need to haul some 4x8 and 2x4m 2x6 beams on the rack. Do you think it will be strong enough for that?

 

[4thgenmedic]

Has anyone seen any pics of a 4th gen, with aftermarket wheels that don't have 50% of the tire hanging outside of the fender? I'm currently wheel shopping and have no idea what to buy.

I’m going 17x8.5.. +25 offset.. she give me right at 1.25 poke

 

[dapperdan]

This looks good! Yeah I have plenty of wheel/tire questions as well. Have some NIB 4Runner TRD Pro wheels in bronze which are +4mm...wonder if I should sell or give them a go on the new taco.

 

[ABComa]

This is a nice setup!

Is there any way to install a tonneau cover with a rack like this?

I will need to haul some 4x8 and 2x4m 2x6 beams on the rack. Do you think it will be strong enough for that?

Check out the Kuat ibex website, they have an option to mount the rack allowing for a retrax tonneau cover. All the capability specs are also listed for weights. And a decent little 3d visualizer to check out some of the options. Would just have to wait for the gen4 model/size of the cover to be confirmed. https://www.kuat.com/product/ibex/

 

[CharvoniaDesign]

Awesome! I have a Kuat IBEX on the way. Thanks for the pics so I can get a preview of how it looks on a 4th gen.

 

[Arrivedmuarim]

Quick question for you,

I saw on the website they can sell you an adapter for the bed cover, did you buy it by any chance?

I would very much like a bed rack and a bed cover at the same time and it's usually not possible with most model.

Thanks

 

[Benny]

A Ranger owner was able to adapt the Kūat IBEX to work with the BAK Revolver X2
(I have the BAK Revolver X4ts with the T-Slot Rails).
Really like this set-up and I hope I can adapt it to my Tacoma.

Sponsored