What TPMS and Lug nuts?

[Delta1Seven]

I just ordered some Method 703 17x8.5 wheels.

What TPMS sensors and Lug nuts do I need to order? Are there specific ones better than others? First time ever ordering after marking wheels for a truck

Sponsored

 

[Delta1Seven]

Bump. Looking to order tonight and hoping someone can point me in the right direction

 

[goin2drt]

I have ordered from here with great luck
Www.tpmsbargains.com

 

[JED]

Bump. Looking to order tonight and hoping someone can point me in the right direction

I have method 703 wheels on my truck and ordered the lugs through them. This is what they provided. They provide 11 thread contact.
Can’t help with TPMS as I used the OEM from the truck.

 

[goin2drt]

I have ordered from here with great luck
Www.tpmsbargains.com

I bought these but with rubber valves for my TRD OE wheels. Installed and then did the auto relearn that our trucks now do with no issues.
https://www.tpmsbargains.com/Toyota-TACOMA-TPMS-Sensor-p/tpms-1204-1620-50-tac-hum-5.htm

 

[SpartanCaptain]

I have method 703 wheels on my truck and ordered the lugs through them. This is what they provided. They provide 11 thread contact.
Can’t help with TPMS as I used the OEM from the truck.

These are technically not correct.

 

[JED]

These are technically not correct.

Can you elaborate?

 

[SpartanCaptain]

Can you elaborate?

The tacoma technically requires Extended thread or ET Lug nuts. These are extended thread but the wrong kind. These are just longer lug nuts. The tacoma requires lug nuts that have a thread that extend inside of the wheel because of how little thread engagement there is.

Something similar to this. Where the thread extends past the conical seat. Otherwise you only get a few turns of thread engagement on the lug nut.

 

[JED]

The tacoma technically requires Extended thread or ET Lug nuts. These are extended thread but the wrong kind. These are just longer lug nuts. The tacoma requires lug nuts that have a thread that extend inside of the wheel because of how little thread engagement there is.

Something similar to this. Where the thread extends past the conical seat. Otherwise you only get a few turns of thread engagement on the lug nut.

From initial thread engagement the subject lug nuts provide 11 full rotations of thread contact before seating in the wheel. The profile is the same as your example.

 

[SpartanCaptain]

The et ones I posted will double the thread engagement. The factory ones are also et like the ones I posted. You may never have an issue with what you got, but it is just recommended to use the long ones.

 

[JED]

The et ones I posted will double the thread engagement. The factory ones are also et like the ones I posted. You may never have an issue with what you got, but it is just recommended to use the long ones.

I’m seeing ET referenced all over the subject lug nuts provide packaging:

 

[SpartanCaptain]

I see it says ET, but google searching that part number shows a lug that is not the normal extended thread.

 

[Slappy]

I have method 703 wheels on my truck and ordered the lugs through them. This is what they provided. They provide 11 thread contact.
Can’t help with TPMS as I used the OEM from the truck.

718's here & same lug nuts from Method the wheels have swapped twice now replaced the stock tires with bigger

Sponsored