2025 Black ORP DCLB - Method 703, 285/75/17, Leveled, ARE CX Cap

existentialshirt · Apr 13, 2025

Update after driving two weeks — while it looks great, it rides a lot rougher. I will probably eventually do a full lift kit and ditch the collars.

See below for photos and specs on my build.

dvrgz · Apr 13, 2025

Love the way this ARE shell looks.

Ray T · Apr 13, 2025

Definitely looks like it was a part of the truck well done

bking · Apr 14, 2025

Did you get the tracks for the Rack from ARE or did they come from Yakima? I have almost the same setup, but I want to add a rack in the back for longer items (Kayak)

existentialshirt · Apr 14, 2025

bking said:
Did you get the tracks for the Rack from ARE or did they come from Yakima? I have almost the same setup, but I want to add a rack in the back for longer items (Kayak)

It’s Yakima branded but I believe ARE sent it altogether as pictured. If you want to ask my installer, you can call DFW Camper Corral in Mesquite TX to confirm.

malore · Apr 14, 2025

Looks incredible! Can't wait to get my +35mm 705's on!

Muckle · Apr 15, 2025

Great looking truck. If you don't mind, can you take measurements from the ground to the bottom of the fenders, through the center of the wheel, for both front and rear?

existentialshirt · Apr 17, 2025

Muckle said:
Great looking truck. If you don't mind, can you take measurements from the ground to the bottom of the fenders, through the center of the wheel, for both front and rear?

It’s 39.5” front and 39.25” back. Didn’t get the chance to measure it before the cap went on, that’s probably sinking it the 0.25”. I chose the readylift (1” rear collar) over Westcott (0.75” rear collar) because I anticipated the cap reducing my ongoing rake.

Chris_2025OR · Saturday at 11:08 PM

Looks so good with the LB and shell

Airborne · Saturday at 11:45 AM

Truck reeally looks good, think im going to order the exaust dump, seems pretty forward install ? Unbolt old, rebolt the new ? Does it use existing hardware ? Nice job on your truck
David

existentialshirt · Saturday at 12:36 PM

Airborne said:
Truck reeally looks good, think im going to order the exaust dump, seems pretty forward install ? Unbolt old, rebolt the new ? Does it use existing hardware ? Nice job on your truck
David

Thanks. Yes doable, had to drop the spare down and twist/tilt the existing exhaust to get it out. Yes, use two stock bolts and rubber hanger. Took 30 mins. Haven’t been able to unload the exhaust pipe… might take it back to a shop to recycle.

2025 Black ORP DCLB - Method 703, 285/75/17, Leveled, ARE CX Cap

existentialshirt

Member

dvrgz

Well-known member

Ray T

Well-known member

bking

Well-known member

existentialshirt

Member

malore

Well-known member

Muckle

Well-known member

existentialshirt

Member

Chris_2025OR

New member

Airborne

Well-known member

existentialshirt

Member

Similar threads