Here yea go. Mine were OK.Would you be willing to take pictures? Specifically of the smaller of the two back seats where the back portion tucks under around the seatbelt?
I received my rears yesterday and installed them. The split seat turned out perfect other than one hole being cut a little out of place. But the non-split side seems like the fabric was cut wrong for me. Had my brother take a look and he wasn’t able to get it any better. As the other side turned out perfect I’m inclined to think it isn’t user error.
trying to decide if it’s worth keeping overall despite the one area of poor fit or if I should just suck it up, accept the defect and avoid re-installing or trying another brand. If they were $150 for the full set it would be a no brainer, but for $300 I want it to fit right.
Fronts arrive Saturday for me. Hope the fronts fit like the double seat in the rear.
If I’m understanding the question right, I noticed they looked a bit silly when I put them on first as well. When I lifted up the bottom of the seat after install, I pulled the material through from the bottom side, and that helped a lot instead of trying to push from the top. Let me know if you have any other questions.Did you do anything different or special to get it to look as good as yours does
If I’m looking at your fronts right, you may have the two seat cushion covers switched. If it’s worth the effort, the orientation helps fit around the seat pivot and buckles much more comfortablyHere yea go. Mine were OK.
hey thanks.If I’m looking at your fronts right, you may have the two seat cushion covers switched. If it’s worth the effort, the orientation helps fit around the seat pivot and buckles much more comfortably
Yep, the uppers look right (airbag flap to door), but those bottoms are switched. I did the same thing when I put on the drivers side, and the pinch at the seatbelt annoyed me enough that I went through and swapped it just so I wouldn’t think about it forever hahahey thanks.
I just checked & both Air Bag tags are on the door side. I believe that’s correct..
Bandit, is that correct?
Rob
Oh yea, you right!!!Yep, the uppers look right (airbag flap to door), but those bottoms are switched. I did the same thing when I put on the drivers side, and the pinch at the seatbelt annoyed me enough that I went through and swapped it just so I wouldn’t think about it forever haha
Done!! Took 10 minutes a seat. Much easier 2nd time aroundOh yea, you right!!!
looks like I got a project for tomorrow!!!
lol
Thanks again
Rob
Glad you got that done so easily Rob, cheers!Done!! Took 10 minutes a seat. Much easier 2nd time around
Better!
Could you attach a new link to these? The Amazon link isn't working on my end at leastI got these air bag compatible covers we're very happy with
Put my Rough Country covers on this morning
This is the share link from Amazon. One side short fleece and the other waterproof. I don't keep them on all the time and just if I'm full of dirt or sweat. They might not be for everyone but we like them.Do either of you have pictures of your covers installed so I could get a sense of how they look? It may also help other people if they're deciding on what to buy
Could you attach a new link to these? The Amazon link isn't working on my end at least
Do either of you have pictures of your covers installed so I could get a sense of how they look? It may also help other people if they're deciding on what to buy
Could you attach a new link to these? The Amazon link isn't working on my end at least