ARB rear steel bumper - will TRD Pro and Trailhunter rear bumper fit other trim models?

[ridetime]

Does anyone know if the bumper on the Trail-hunter and TRD pro will fit other models? The accessory pdf posted here in the form has a 4 digit number that may answer the question but I can't figure out what they mean.

Sponsored

 

[ridetime]

Ok so I have the park sensors in my factory bumper but your saying they may not transfer over to the new bumper correct?

 

[StreeTaco]

Sheldon told me that it will fit, and the sensors should transfer over.. it also states that it’s going to be available at Hybrid Vehicle launch, or thereafter.

 

[ridetime]

I have a limited. I think the ARB bumper looks so much better than the cheap looking plastic one on my truck.

 

[MT-Taco]

Options..

https://theyotagarage.com/products/add-rear-stealth-bumper-2024-toyota-tacoma-copy

 

[ridetime]

Options..

https://theyotagarage.com/products/add-rear-stealth-bumper-2024-toyota-tacoma-copy

Nice!

 

[theKurt]

That's a nice one.
I noticed the black panels on the corners. I believe that is the radar for the the blindspot monitoring. Ensuring those panels are kept in place is going to be the limiting factor in obtaining an aftermarket bumper and I'm sure ARB included that somehow. I dont know how the factory bumper conceals them and keeps them functional, but they need to have a clear view. Can't put PPF on them or anything apparently.

 

[n118nw]

Options..

https://theyotagarage.com/products/add-rear-stealth-bumper-2024-toyota-tacoma-copy

I think the ARB one looks better but I'm eager to see what other people fab. TRD JON recently did a video where he scraped a lot on the hitch receiver so I'm curious if anyone is going to make something like a skid plate to protect the hitch and chain hookups.

 

[Dblaines24TRDOR]

I think the ARB one looks better but I'm eager to see what other people fab. TRD JON recently did a video where he scraped a lot on the hitch receiver so I'm curious if anyone is going to make something like a skid plate to protect the hitch and chain hookups.

DRT Fabrication makes a hitch skid. I saw it on their website. Don't have one so I can't comment as to whether or not it works!

https://www.drt-fabrication.com/product/hitch-skid

 

[Romer]

Anyone install one of these yet? I understand you have to order the wiring harness with it

Comparing this to the Rago one. I like ARB products in general, but some have had limitations. One being the rear bumper for 200 series Land Cruiser if you get thee one with carriers has side plates that are bolted on vs being one peice. Have loved the ARB Front bumpers on the 3 vehicles I have had

Sponsored