Sponsored
Ditch light install using factory AUX switch and pigtails
- Thread starter Duce95
- Start date
- Watchers 8
Kielly
Well-known member
- First Name
- Ryan
- Joined
- Jun 14, 2023
- Threads
- 48
- Messages
- 631
- Reaction score
- 609
- Location
- Alberta, Canada
- Vehicle(s)
- 2024 Tacoma Sport+ 6M
Toyota really made it easy with these prewired plugs I must say. When I ordered my ditch lights I was whining like a little toddler thinking I was going to have to go through the dreaded firewall before remembering I don't have to do it at all! 
I don't like the placement on these prewired plugs though I must say. The one in front makes sense, for a light bar and what not, which is what I plugged my ditch lights into, AUX 2. Another one in the bonnet which would preferably make more sense for ditch lights and then they put the third inside the cabin somewhere if I'm reading the manual correctly which makes absolutely zero sense to me. I would've liked to see one near the middle or rear of the truck, for something like rollbar lights.
I don't like the placement on these prewired plugs though I must say. The one in front makes sense, for a light bar and what not, which is what I plugged my ditch lights into, AUX 2. Another one in the bonnet which would preferably make more sense for ditch lights and then they put the third inside the cabin somewhere if I'm reading the manual correctly which makes absolutely zero sense to me. I would've liked to see one near the middle or rear of the truck, for something like rollbar lights.
OP
OP
Duce95
Well-known member
- Thread starter
- #4
These lights are Baja Designs Squadron Sport. They were used as fogs on my 2021, I took them off before I traded it in. I ordered the flat face and the mounting hardware from Baja Designs. Gave them a shine and GTG.
The wire harness I made by measuring the lengths and soldering the connections together. Protected in some loom. I will post pics of the final install once the correct replacement mounts arrive.
theKurt
Well-known member
- First Name
- Kurtis
- Joined
- Apr 5, 2024
- Threads
- 10
- Messages
- 61
- Reaction score
- 82
- Location
- Calgary, Canada
- Vehicle(s)
- 2024 Tacoma Sport+ 6M
Like you said, there's supposed to be one in the cabin somewhere but I have yet to try and locate it. I *think its behind the panel to the left of the pedals. There should be one at the rear bumper too, but again, I haven't gone looking for it yet.Toyota really made it easy with these prewired plugs I must say. When I ordered my ditch lights I was whining like a little toddler thinking I was going to have to go through the dreaded firewall before remembering I don't have to do it at all!
I don't like the placement on these prewired plugs though I must say. The one in front makes sense, for a light bar and what not, which is what I plugged my ditch lights into, AUX 2. Another one in the bonnet which would preferably make more sense for ditch lights and then they put the third inside the cabin somewhere if I'm reading the manual correctly which makes absolutely zero sense to me. I would've liked to see one near the middle or rear of the truck, for something like rollbar lights.
Sponsored
Lonewolf90
Member
Here you go!
Tacoflvrd
Well-known member
- First Name
- Chris
- Joined
- Apr 15, 2024
- Threads
- 4
- Messages
- 158
- Reaction score
- 149
- Location
- South carolina
- Vehicle(s)
- 2024 TRD sport
Looks good. I want to add a light bar once I can get the trd pro grill. Which switch blanks are these aux plugs wired to?
bking
Well-known member
Depending on your trim and option package, you'll have 3 Aux switches to the left of the steering wheel. They're pretty obvious if you have them. I know they come on TRD Premium trims. Maybe upgrade, but I'm not sure.
Tacoflvrd
Well-known member
- First Name
- Chris
- Joined
- Apr 15, 2024
- Threads
- 4
- Messages
- 158
- Reaction score
- 149
- Location
- South carolina
- Vehicle(s)
- 2024 TRD sport
Ahhh, don’t have any aux switches but I do have the black plugs in the diagram.
Sponsored
Tacoflvrd
Well-known member
- First Name
- Chris
- Joined
- Apr 15, 2024
- Threads
- 4
- Messages
- 158
- Reaction score
- 149
- Location
- South carolina
- Vehicle(s)
- 2024 TRD sport
I wonder if it’s already run and they just put in blanks. My last Tacoma was an SR and it was pre-wired for a lot of stuff that it didn’t come with. Guess I’ll have to check.
ReddingonTRD
Member
- First Name
- Sean
- Joined
- Jul 13, 2024
- Threads
- 4
- Messages
- 17
- Reaction score
- 8
- Location
- Orange County
- Vehicle(s)
- 2024 Tacoma TRD Pro
Hi there! For the harness that originally came with your lights, did you just snip off the on/off switch and relay?
ReddingonTRD
Member
- First Name
- Sean
- Joined
- Jul 13, 2024
- Threads
- 4
- Messages
- 17
- Reaction score
- 8
- Location
- Orange County
- Vehicle(s)
- 2024 Tacoma TRD Pro
Thanks a bunch!
wolfpackwest
Active member
Thanks for posting this to help make it a little more clear for the rest of us. I just received my Rigid D-SS Pro Floods, and looking to wire them up to the AUX switch on my trailhunter. The wiring harness that comes with the Rigid lights has an inline 15A fuse, so my thought would be to cut out that section and just wire directly to the Toyota pigtail, using the black wire and hooked up to AUX 1. I don't need to run the power/ground wires from the Rigid harness to battery or anything right? - just wire them directly into the pigtail, accordingly? It almost seems too easy.
Sponsored
