Full or Partial PPF

[TacoFreak]

Since I have a Sport with that wicked awesome "air scoop", that wrap had to be done in two pieces: One big sheet over the whole hood and then a smaller panel behind the scoop to the windshield.

My detailer took the scoop off and did the hood in one piece. He is a real pro and he said that hood was the hardest body panel he had ever wrapped.

Wicked awesome is a perfect description of the scoop from my POV too.

Sponsored

 

[tacorancher]

My detailer took the scoop off and did the hood in one piece. He is a real pro and he said that hood was the hardest body panel he had ever wrapped.

Wicked awesome is a perfect description of the scoop from my POV too.

Mine did that on my 2022 PRO as well and he even cut perfectly around the decal - he said it was wicked difficult - no seams visible — true artistry

 

[GER_95]

Did front end [hood, bumper, fenders] PPF clear and roof/pillars & mirror caps in PPF satin black to give a "pro" look. May look at adding some protection to the rear fender flares.

 

[exia]

I did full because I did not own the vehicle for a week, and I had two rock chips on the rear panels. yes, I see the line. it bothers me, but the bottom lineis that you can fix that in the distant future with buffing and clay bar. not having it means repainting down the line.

 

[tacorancher]

I did full because I did not own the vehicle for a week, and I had two rock chips on the rear panels. yes, I see the line. it bothers me, but the bottom lineis that you can fix that in the distant future with buffing and clay bar. not having it means repainting down the line.

Im the most OCD person alive but somehow the little PPF lines don’t bother me - but paint damage does

 

[Joech]

I did full hood, bumper, fenders, a pillars and leading edge of the roof line. I had partial PPF done before on my other vehicle and I told myself never again. It looked good for a while until the seam started collecting dust.

Sponsored