Hood insulation

[Tacotee]

Yes, I enquired the insulation is almost $500 and the fasteners are sold individually

Holy crap Li

My TRD Sport 4x4 with Sport upgrade+ 14" screen and moon roof does NOT have it. Salesman researched it via my VIN and advised that the factory primarily only includes the insulation on Premium models.
It's like $474.00 from Toyota. I spent $41.00 on butylene heat/sound deadening sheets from Amazon and installed in to the underside. Seriously reflects the heat, deadens the vibration and some engine noise.

did you use any clips or just used the adhesive?

Sponsored

 

[JED]

Holy crap Li

did you use any clips or just used the adhesive?

I saved my money and did neither

 

[TacoJay]

Holy crap Li

did you use any clips or just used the adhesive?

Nope. The insulation sheets are crazy sticky. They are designed with a raised honeycomb-like pattern embossed onto the foil. After cutting the sheets with scissors (if you desire, they will stick on top of each other) you use a small roller (one small and one larger rollers on Amazon for cheap) to press the sheet onto the surface metal. As you roll it, the honeycomb pattern flattens and gives you a visual reference to make sure it's all pressed. The material can be pressed into all of the nooks and crannies. I wiped the underside of the hood with rubbing alcohol before installing it.
I live in Florida. It's in the 90°s everyday and my truck is the Underground color and it is still sticking perfectly.
I response to the other posters that said he chose not to do either, to each his own, but my local Toyota/Lexus guy said he would be concerned about the engines long-term heat effect on the hood paint, if there was no insulation of any kind. He has seen what I did and commented that it provides way more protection than the factory piece. The pictured box of 18 is more than you need to cover ALL of the hoods underside btw.

 

[Tacotee]

Nope. The insulation sheets are crazy sticky. They are designed with a raised honeycomb-like pattern embossed onto the foil. After cutting the sheets with scissors (if you desire, they will stick on top of each other) you use a small roller (one small and one larger rollers on Amazon for cheap) to press the sheet onto the surface metal. As you roll it, the honeycomb pattern flattens and gives you a visual reference to make sure it's all pressed. The material can be pressed into all of the nooks and crannies. I wiped the underside of the hood with rubbing alcohol before installing it.
I live in Florida. It's in the 90°s everyday and my truck is the Underground color and it is still sticking perfectly.
I response to the other posters that said he chose not to do either, to each his own, but my local Toyota/Lexus guy said he would be concerned about the engines long-term heat effect on the hood paint, if there was no insulation of any kind. He has seen what I did and commented that it provides way more protection than the factory piece. The pictured box of 18 is more than you need to cover ALL of the hoods underside btw.

Thanks a lot appreciate it

 

[Tacotee]

Nope. The insulation sheets are crazy sticky. They are designed with a raised honeycomb-like pattern embossed onto the foil. After cutting the sheets with scissors (if you desire, they will stick on top of each other) you use a small roller (one small and one larger rollers on Amazon for cheap) to press the sheet onto the surface metal. As you roll it, the honeycomb pattern flattens and gives you a visual reference to make sure it's all pressed. The material can be pressed into all of the nooks and crannies. I wiped the underside of the hood with rubbing alcohol before installing it.
I live in Florida. It's in the 90°s everyday and my truck is the Underground color and it is still sticking perfectly.
I response to the other posters that said he chose not to do either, to each his own, but my local Toyota/Lexus guy said he would be concerned about the engines long-term heat effect on the hood paint, if there was no insulation of any kind. He has seen what I did and commented that it provides way more protection than the factory piece. The pictured box of 18 is more than you need to cover ALL of the hoods underside btw.

Can you send a picture of what it looks like

 

[TacoJay]

Can you send a picture of what it looks like

 

[Tacotee]

Thanks bro your the man

 

[tkrum015]

What do you get from doing this? Just a little more quite?

 

[Sandytntn]

Just picked up our Sport Premium and yes it has it.

Yes, my TRD Sport Premium has it. Opened the hood several times and never noticed it. Looks like pretty good quality.

 

[Gfenza89]

I wouldn’t spend the money on the oem insulation blanket, it’s a truck and I personally love the sound of the engine and the ticking from the d4s, makes me happy to know we have dual injection and won’t have carbon build up like literally every other manufacture engines.

 

[BOBC61]

mine has the factory one in i

 

[Garrett]

Ordered the OEM insulation and clips yesterday. Got everything for ~$250. Will report back after I install it.

Sponsored