Sponsored

Trd Pro / Trailhunter engine airfilter

scottharrell7

New member
First Name
Scott
Joined
Nov 11, 2024
Threads
1
Messages
3
Reaction score
1
Location
Florida
Vehicle(s)
2024 Tacoma Trail Hunter
So I have a question regarding the air filter. Service manual states to replace it at 36 months / 30,000 miles, 72 months / 60,00 and so on. Somewhere I was told and I checked that the air filter is reusable, it looks like a K&N type or some variation of that. Who is to clean it and re oil it ? Once it’s clean it needs at least a day to dry before oiling it and another day for the oil to dry ? I know it would mess up the gen 3 map sensor if you don’t. I can’t imagine that this new engine will be less “susceptible “ to problems due to an improperly dried filter. Will the dealer charge an arm and a leg for a new one every interval ? I read through the owners manual and nothing is said and I even attempted to look the filter up using the numbers on it. Mine read 17801-YY010. It will bring up several different Toyota filters but not this one. I’m going to the dealership next week and I will inquire. But in the meantime I wanted someone else thoughts and input on this matter.
Sponsored

 

HBNARO

Active member
Joined
Oct 13, 2024
Threads
1
Messages
33
Reaction score
10
Location
Scottsdale Az
Vehicle(s)
2024 TRD PRO in route
So I have a question regarding the air filter. Service manual states to replace it at 36 months / 30,000 miles, 72 months / 60,00 and so on. Somewhere I was told and I checked that the air filter is reusable, it looks like a K&N type or some variation of that. Who is to clean it and re oil it ? Once it’s clean it needs at least a day to dry before oiling it and another day for the oil to dry ? I know it would mess up the gen 3 map sensor if you don’t. I can’t imagine that this new engine will be less “susceptible “ to problems due to an improperly dried filter. Will the dealer charge an arm and a leg for a new one every interval ? I read through the owners manual and nothing is said and I even attempted to look the filter up using the numbers on it. Mine read 17801-YY010. It will bring up several different Toyota filters but not this one. I’m going to the dealership next week and I will inquire. But in the meantime I wanted someone else thoughts and input on this matter.
Great question. Subscribed
 

TacoFreak

Well-known member
First Name
James
Joined
May 23, 2024
Threads
2
Messages
1,152
Reaction score
1,193
Location
Crozet, Virginia
Vehicle(s)
2024 Tacoma TRD Pro
Yeah - that is a good question. I wonder if the dealers know or if they will just punt like they often do. It is definitely something to get sorted out before it needs cleaned.

It is a special cleaning procedure and kind of a PITA, so it would be good to know the answer to your question. I also assume there is a different tune for these engines, since this filter seems to throw codes when it is used on any of the other trims.
 

Sagebrush

Well-known member
First Name
Tony
Joined
May 18, 2024
Threads
4
Messages
524
Reaction score
445
Location
Salmon Idaho
Vehicle(s)
2016 Tacoma
The filter in my non-hybrid is straight paper. Are you sure yours is oiled? That would sure monkey with the MAF sensor.
 
OP
OP

scottharrell7

New member
First Name
Scott
Joined
Nov 11, 2024
Threads
1
Messages
3
Reaction score
1
Location
Florida
Vehicle(s)
2024 Tacoma Trail Hunter
Yes I actually took it out and looked at it. It looks like a k&n cone filter. But it says trd on it and the backing is an odd octagon shape. I will probably just purchase a second one so I can keep a clean one to switch out whenever it’s time. I always hold on to the stock filters so I can run it will my k&n is drying. I like to let the filters dry for several days before and after oiling them.
Sponsored

 
 



Top