Upgraded Suspension for excess load

[Gurvy522]

Awesome do you think these will work with a rear spacer lift? I am going to install the 1" spacer lift back there with my readylift 2.5" kit.

I wonder if anyone has made a bump stop for the front yet, that would be next after fixing the rear..

If you get the SES kit it comes with 2x spacers. I believe they're 0.5" thick. So if you install both spacers it'll make up for the added lift from the rear suspension lift spacers.

Sponsored

 

[Ron]

The spacers i got are 3/8, so about 3/4 total.

 

[sprocket47]

I installed the Timbrens with both spacers and they were still 2' from the axle unloaded. I contacted customer service and they sent me stops that were 3/4'' longer and now they rest about an inch from the axle. I towed a relatively light trailer with a loaded bed on a 3k mile trip and they were a lifesaver and my truck was level the whole time. For clarification, I have an SR on leaf springs so that might be the difference on why the gap was so different than their spec setup.

 

[jdmz]

I pulled the trigger and got the Timbren. I used it on my 2.5 Readylift SST and with both spacers have about 1" of space unloaded although I have a rooftop tent.

The difference is night and day! No more harsh bottoming out and going through speed bumps is great. The lift made the ride more stiff but I like it like this better because the stock TRD OR was too squishy.

Sponsored