Sponsored

Gampy164

Member
First Name
Don
Joined
Oct 29, 2023
Threads
0
Messages
11
Reaction score
17
Location
Indiana
Vehicle(s)
2024 Toyota Tacoma TRD Off-Road
I had the front lower spring adapters and rear one inch spacers from Peak installed earlier this week. The truck cap and gear in the bed were weighing down the truck a little, and this seems to have fixed that for me. The front and rear are lifted about an inch with this setup.

2024 Tacoma Peak Suspension - 2024 Tacoma Lift Kits IMG_0702
2024 Tacoma Peak Suspension - 2024 Tacoma Lift Kits IMG_0716
Sponsored

 

Lucidsen

New member
First Name
Drew
Joined
Aug 26, 2024
Threads
0
Messages
4
Reaction score
1
Location
Kenoshs
Vehicle(s)
2024 trailhunter
Hey guys (@Peak Suspension ).
Hope all is well.

We've touched base a few times over the past month or so on your lift kit for the Trailhunter. Just touching base again per your request, been 2 weeks again.

V/r
Drew
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
Hey guys (@Peak Suspension ).
Hope all is well.

We've touched base a few times over the past month or so on your lift kit for the Trailhunter. Just touching base again per your request, been 2 weeks again.

V/r
Drew
We're still trying to nail down a TrailHunter and it looks like we have one scheduled to come in next month.

Unfortunately, we cannot rely on outside sources for test fitting and R&D

We hope to be able to confirm all this soon

Thank you,
 

babestur

New member
First Name
Abe
Joined
Oct 10, 2024
Threads
0
Messages
1
Reaction score
0
Location
SoCal
Vehicle(s)
SR Tacoma Double Cab 2WD
Would these fit a 2WD SR Double Cab?
 

Mini2nut

Well-known member
Joined
May 6, 2023
Threads
8
Messages
166
Reaction score
132
Location
SoCal
Vehicle(s)
2024 Tacoma TRD Off-Road
Aren’t you limiting factory suspension travel and firming up the ride quality with these type of aftermarket kits?
 

Sponsored

Lucidsen

New member
First Name
Drew
Joined
Aug 26, 2024
Threads
0
Messages
4
Reaction score
1
Location
Kenoshs
Vehicle(s)
2024 trailhunter
@Peak Suspension
Hey guys,
Hope all is well.

Touching base with you. We messaged throughout last month about you guys finalizing a full Trailhunter lift. Last you guys messaged, you said you'd have something this month. Since it's the middle of the month, I figured I'd touch base and see what you guys put together for it.

V/r
Drew
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
@Peak Suspension
Hey guys,
Hope all is well.

Touching base with you. We messaged throughout last month about you guys finalizing a full Trailhunter lift. Last you guys messaged, you said you'd have something this month. Since it's the middle of the month, I figured I'd touch base and see what you guys put together for it.

V/r
Drew
We have the TrailHunter in the shop now and will be confirming today or tomorrow.

Thanks!
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
Aren’t you limiting factory suspension travel and firming up the ride quality with these type of aftermarket kits?
Not really, we use a 2 piece kit to spread the lift between the collar and top mount. This way it keeps the shock shaft in relatively the same position.

We also are a little more conservative with our lift heights than other brands which is why our ride quality is virtually indistinguishable from stock.
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
@Peak Suspension
Hey guys,
Hope all is well.

Touching base with you. We messaged throughout last month about you guys finalizing a full Trailhunter lift. Last you guys messaged, you said you'd have something this month. Since it's the middle of the month, I figured I'd touch base and see what you guys put together for it.

V/r
Drew
We finally tested it, and as suspected it fits fine. You just have to remove the factory spring seat with the hydrobump provision.

Our next run of spring spacers will be including a provision for hydrobumps as well so you get the lift without sacrificing function.

2024 Tacoma Peak Suspension - 2024 Tacoma Lift Kits Hydrobum
 

Sponsored

RESQCAT

Well-known member
First Name
Dennis
Joined
Jul 27, 2024
Threads
1
Messages
51
Reaction score
22
Location
North Bend, WA
Vehicle(s)
2024 Toyota Tacoma Trailhunter, 2000 Jeep Grand Cherokee (very modified!)
My Trailhunter is being modified for SAR work. Just recalculated the estimated increased static load in front from bumper and winch - 235 lbs. Increased load in rear (Leitner rack, boxes, Decked with CargoGlide, rescue and personal gear, fluids, etc.) is 760.

I could use some expert advice on a solution to bring it back to par... Any ideas? Dobinsons does have some springs that work but I must go light in the rear or heavy... my load is in between.

NOTE: I am still waiting on a compatible bed stiffener from Leitner that will work with their ACS Forged. Don't want to damage the bed on my new truck with all the weight from mods!
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
@Peak Suspension is the 2.25” a true 2.25” lift? Do you have before and after measurements?
Yes it is a true a 2.25" lift increase. We do all measurements before and after before ever releasing a product.

That being said, there are variables with the hybrid for example that add additional weight that could affect final lift heights but we just built one in the shop and it was the same
 
OP
OP
Peak Suspension

Peak Suspension

Active member
BASIC Sponsor
First Name
Nick
Joined
Jun 10, 2024
Threads
1
Messages
29
Reaction score
28
Location
Riverside
Vehicle(s)
2024 Toyota Tacoma TRD Offroad
My Trailhunter is being modified for SAR work. Just recalculated the estimated increased static load in front from bumper and winch - 235 lbs. Increased load in rear (Leitner rack, boxes, Decked with CargoGlide, rescue and personal gear, fluids, etc.) is 760.

I could use some expert advice on a solution to bring it back to par... Any ideas? Dobinsons does have some springs that work but I must go light in the rear or heavy... my load is in between.

NOTE: I am still waiting on a compatible bed stiffener from Leitner that will work with their ACS Forged. Don't want to damage the bed on my new truck with all the weight from mods!
As stated before, if you remove the factory spring perch and replace with our spacers, you can get 1" or 2" on your TrailHunter. We just built built one with a bedrack and RTT with gear and it looks great.
 

rickmista1213

New member
First Name
rickey
Joined
Oct 23, 2024
Threads
0
Messages
3
Reaction score
0
Location
columbus ohio
Vehicle(s)
2024 tacoma
Yes it is a true a 2.25" lift increase. We do all measurements before and after before ever releasing a product.

That being said, there are variables with the hybrid for example that add additional weight that could affect final lift heights but we just built one in the shop and it was the same
I have the sway bar disconnect and I’m hearing if you do a lift the drive shaft hits the sway bar. Do you know if this is true?
Sponsored

 
 



Top