Factory mudflaps part numbers # - from 4th gen 2024 Tacoma SR5

[taco4moro]

How? The attachment points where I’m supposed to bolt in the supplied hardware are square holes and much to big for supplied bolts. The QR instructions don’t address this?

yeah you just directly screw into the square holes with a little bit of force, it's a pain in the ass some bolts, it helped me lay down flat and push in from behind the hole as well

Sponsored

 

[CanyonFisherSummitSeeker]

yeah you just directly screw into the square holes with a little bit of force, it's a pain in the ass some bolts, it helped me lay down flat and push in from behind the hole as well

You mean with the plastic rivets in place correct? Because without them the square holes are too big for bolts.

 

[taco4moro]

You mean with the plastic rivets in place correct? Because without them the square holes are too big for bolts.

yeah don’t remove these, you screw directly into them

 

[MarkusJ]

We make the mud flaps for the 2024 Tacoma and the price will be under $40! Stay tuned if interested

I was lucky and got them when they were in stock. Just like OEM

 

[CanyonFisherSummitSeeker]

I just installed the micros. The rear passenger holes aren’t cut out right so only three bolts would fit. Waiting on response from ARK. The other three went in fine so I know it’s not me.
I honestly don’t like them very much and don’t like how they fasten overall. Fit and finish isn’t great (qc stuff). I’d return them if I could.

I still have high hopes for their splash guards. If they take care of me with the rear passenger micro I’ll likely still give the splash guards a shot.

 

[LonghornTacoma]

I’ve got a set of front and rear flaps for an SR5. $100 takes them. I just replaced them with the WeatherTech ones.

 

[Iowa Taco]

Any chance you can post pictures of the Weather Tech mud flaps on your Tacoma?

I’ve got a set of front and rear flaps for an SR5. $100 takes them. I just replaced them with the WeatherTech ones.

 

[Mini2nut]

I installed a set of RokBlokz mud flaps and am very happy with them. They are the ultimate protection for the thin Toyota factory paint.

 

[HoptownBob]

Someone just posted recently that they installed these and said they are exactly like the OEM only 1” wider, which sounds great!

Ecarzo Mud Flaps Splash Guards

https://a.co/d/9iEWBVo

 

[LonghornTacoma]

Any chance you can post pictures of the Weather Tech mud flaps on your Tacoma?

Here you go. They are about 1.5” wider and 2” longer.

 

[hemlockz]

I pulled mine off recently... if anyone is interested, I'll make you a good deal.

 

[HoptownBob]

These sound like the ones to go with:
https://www.tacomaworld.com/threads...e-on-my-2024-tacoma-pro.845736/#post-30253288

Sponsored