OEM Trifold Hard Tonneau Cover PT954-35240 installed on 2024 Tacoma

[Randyg]

I did originally think water was coming in through the tailgate side gaps. I made these seals out of 5/16” x 1” Black Vinyl Foam weatherstrip tape. Fits perfectly. Does not interfere with auto tailgate

Sponsored

 

[Mpflies2]

I did originally think water was coming in through the tailgate side gaps. I made these seals out of 5/16” x 1” Black Vinyl Foam weatherstrip tape. Fits perfectly. Does not interfere with auto tailgate

What did you use to adhere the foam to the sides? I’ll keep this in mind if I have any significant leaks

 

[jimmy115]

What did you use to adhere the foam to the sides? I’ll keep this in mind if I have any significant leaks

same question +1

 

[Randyg]

What did you use to adhere the foam to the sides? I’ll keep this in mind if I have any significant leaks

It is self-adhesive.

 

[Randyg]

same question +1

 

[Mpflies2]

It is self-adhesive.

thank you! Took a screenshot and added as a mental note for if it leaks. I forgot to check before I left the house this morning and it had down poured overnight. I should’ve looked into it.

 

[sjfuqua]

OEM cover + bed mat + divider?

So I have read through this thread 3 times before posting my question.

Just installed the OEM cover with OEM Tacoma bed mat. Very happy so far and made my decision after reading this thread.

Looking to purchase and install the OEM bed divider next.

From this thread I understand the divider will have to be trimmed about 3/4 from each side, and there is about a 3/4 inch gap between the 'lowered' divider and the floor of the truck bed without a mat. (and given the mat is about 1/2 inch a 3/4 gap seems ok but close)

Before I pull the trigger looking for a definitive, has anyone installed the OEM cover, with the OEM mat, and the OEM bed divider (modified width) and does it fit? Any issues?

Thank you and glad to be a new member to this forum.

 

[HBNARO]

There is a crevice in my OCD brain that wants those hoses to equidistant, and they are not.

I think I have a similar crease or the same OCD

 

[jimmy115]

OEM cover + bed mat + divider?

So I have read through this thread 3 times before posting my question.

Just installed the OEM cover with OEM Tacoma bed mat. Very happy so far and made my decision after reading this thread.

Looking to purchase and install the OEM bed divider next.

From this thread I understand the divider will have to be trimmed about 3/4 from each side, and there is about a 3/4 inch gap between the 'lowered' divider and the floor of the truck bed without a mat. (and given the mat is about 1/2 inch a 3/4 gap seems ok but close)

Before I pull the trigger looking for a definitive, has anyone installed the OEM cover, with the OEM mat, and the OEM bed divider (modified width) and does it fit? Any issues?

Thank you and glad to be a new member to this forum.

Same question

Sponsored