Ah. Thank you.Once you adjust and save it, you need to reprogram the circumference monitoring system again to readjust it.
Sponsored
Ah. Thank you.Once you adjust and save it, you need to reprogram the circumference monitoring system again to readjust it.
How'd you get to this menu system?I adjusted my front camera via the on board diagnostic service menu. I adjusted it +165 while parked in a place where there were lines and it all lined up. Although for some reason the view adjustment button is now greyed out and I can’t access it anymore.
Key on engine off - turn audio off - turn display off - swipe right 5 times swipe left 5 times.How'd you get to this menu system?
wow thanks for finding this, the dealer was going to charge me a couple hundred $ to fix.Key on engine off - turn audio off - turn display off - swipe right 5 times swipe left 5 times.
Function check - Canera settings - View adjustment.
Make sure to park where there are plenty of straight lines in front and around your car for alignment purposes. Do the adjustment in one shot or don’t save.
Mine is greyed out because I already made an adjustment. So do it in one time.
I used Rave’s bracket. Good luck with your alignment. Find a flat place with a bunch of lines or lay some stuff down and take your time.wow thanks for finding this, the dealer was going to charge me a couple hundred $ to fix.
Which camera bracket did you use? Hoping to be able to fix the camera alignment perfectly as having the 360 view off bothers me so much.