Heritage Grill Camera Swap - Observations

[rijc99]

Once you adjust and save it, you need to reprogram the circumference monitoring system again to readjust it.

Ah. Thank you.

Sponsored

 

[Baltimore]

I adjusted my front camera via the on board diagnostic service menu. I adjusted it +165 while parked in a place where there were lines and it all lined up. Although for some reason the view adjustment button is now greyed out and I can’t access it anymore.

How'd you get to this menu system?

 

[rijc99]

How'd you get to this menu system?

Key on engine off - turn audio off - turn display off - swipe right 5 times swipe left 5 times.

Function check - Canera settings - View adjustment.

Make sure to park where there are plenty of straight lines in front and around your car for alignment purposes. Do the adjustment in one shot or don’t save.

Mine is greyed out because I already made an adjustment. So do it in one time.

 

[taco4moro]

Key on engine off - turn audio off - turn display off - swipe right 5 times swipe left 5 times.

Function check - Canera settings - View adjustment.

Make sure to park where there are plenty of straight lines in front and around your car for alignment purposes. Do the adjustment in one shot or don’t save.

Mine is greyed out because I already made an adjustment. So do it in one time.

wow thanks for finding this, the dealer was going to charge me a couple hundred $ to fix.

Which camera bracket did you use? Hoping to be able to fix the camera alignment perfectly as having the 360 view off bothers me so much.

 

[rijc99]

wow thanks for finding this, the dealer was going to charge me a couple hundred $ to fix.

Which camera bracket did you use? Hoping to be able to fix the camera alignment perfectly as having the 360 view off bothers me so much.

I used Rave’s bracket. Good luck with your alignment. Find a flat place with a bunch of lines or lay some stuff down and take your time.

 

[Castiglione]

Once you adjust and save it, you need to reprogram the circumference monitoring system again to readjust it.

Hello, how do I reprogram the circumference monitoring system? Also, can you tell me how I’m suppose to flip my camera view through the settings? I tried doing the plus and minus but it’s not flipping my camera. Thank you in advance

 

[hemlockz]

I used the bracket but didn’t flip my camera (rave style) because I didn’t have a way to change the camera to upside down. I think the problem with that is the camera is not symmetrical so it ends up too skewed-exactly like gurvey said…. This can’t be a matter of adjustment, I gotta do what he did and physically flip it a tech stream it.

 

[rijc99]

I used the bracket but didn’t flip my camera (rave style) because I didn’t have a way to change the camera to upside down. I think the problem with that is the camera is not symmetrical so it ends up too skewed-exactly like gurvey said…. This can’t be a matter of adjustment, I gotta do what he did and physically flip it a tech stream it.

I had to go all the way to positive 165 to line up.

 

[Baltimore]

Sounds like I might need to access this adjustment menu to fix my front camera line up. Shows "short" since doing the change with Rave bracket.

 

[rijc99]

Sounds like I might need to access this adjustment menu to fix my front camera line up. Shows "short" since doing the change with Rave bracket.

The angle is different so you need to adjust it plus (or minus) by quite a bit. That will bring it back in correct alignment.

 

[shantdiarbi]

The angle is different so you need to adjust it plus (or minus) by quite a bit. That will bring it back in correct alignment.

Sounds like I might need to access this adjustment menu to fix my front camera line up. Shows "short" since doing the change with Rave bracket.

did you ever end up adjusting it yourself? I have the exam same issue after using the rave camera bracket. Let me know thanks!

 

[rijc99]

did you ever end up adjusting it yourself? I have the exam same issue after using the rave camera bracket. Let me know thanks!

+165 and it aligned in my case. Only save it if you’ve gotten it aligned. You get one save.

 

[shantdiarbi]

+165 and it aligned in my case. Only save it if you’ve gotten it aligned. You get one save.

Got it. And this is the only adjustment you had to make? Nothing to do with the 360. Just the front camera +165

 

[rijc99]

Got it. And this is the only adjustment you had to make? Nothing to do with the 360. Just the front camera +165

Yes. Park where there are lines so you can check alignment.

 

[shantdiarbi]

Yes. Park where there are lines so you can check alignment.

Sounds good, ty brother!

Sponsored