Heritage Grill Camera Swap - Observations

[Sagebrush]

An interesting post to sip coffee by.

Sponsored

 

[Yotota]

Both links link you to the same section, attached below!

You, sir, are a gentleman and a scholar!

CANCEL DIAGNOSTIC MODE
HINT: There are 2 methods to cancel diagnosis
(a) Cancellation method 1
(1) Press and hold the VOL switch for 3 seconds or more to restart the system.
(b) Cancellation method 2
(1) Turn the ignition switch off.

 

[SonoranSurvivalist]

Thanks to all who've added into this thread as I intend to get the heritage grill in the near future.

 

[Castiglione]

We also need someone to try long-pressing on their greyed-out button to see if this works for them. Fingers crossed!

Had to do this because I accidentally saved the settings but yes, IT DOES WORK lol except it saves your last settings as your default. Meaning if I’m trying to get to 165 and I saved it to +100 the first time, means I would have to do +65 next time I adjust it again even though it’s set to ‘0’ if that makes sense? Kinda weird. Maybe someone else can confirm that but I’m glad my front camera is working again jeez

 

[taco4moro]

Had to do this because I accidentally saved the settings but yes, IT DOES WORK lol except it saves your last settings as your default. Meaning if I’m trying to get to 165 and I saved it to +100 the first time, means I would have to do +65 next time I adjust it again even though it’s set to ‘0’ if that makes sense? Kinda weird. Maybe someone else can confirm that but I’m glad my front camera is working again jeez

good to know it's repeatable, i spent way too long trying to get it perfect on the first try

 

[Delta1Seven]

Had to do this because I accidentally saved the settings but yes, IT DOES WORK lol except it saves your last settings as your default. Meaning if I’m trying to get to 165 and I saved it to +100 the first time, means I would have to do +65 next time I adjust it again even though it’s set to ‘0’ if that makes sense? Kinda weird. Maybe someone else can confirm that but I’m glad my front camera is working again jeez

Thank you so much for confirming this

 

[Castiglione]

good to know it's repeatable, i spent way too long trying to get it perfect on the first try

I would also like to add. This is just my opinion. I know ppl are saying to follow the lines but because of the fish eye effect, the angle will skew the farther the line goes. I would suggest to align it with the first 1-2 feet of your front view. This will make a lot of sense once you view it from the birds eye view angle or as a whole. Good luck!!!!

 

[Yotota]

Had to do this because I accidentally saved the settings but yes, IT DOES WORK lol except it saves your last settings as your default. Meaning if I’m trying to get to 165 and I saved it to +100 the first time, means I would have to do +65 next time I adjust it again even though it’s set to ‘0’ if that makes sense? Kinda weird. Maybe someone else can confirm that but I’m glad my front camera is working again jeez

AWESOME! Thanks for confirming. This is a big advancement for these trucks, allowing us to keep our camera working after any suspension lift or grill swap.

 

[Yotota]

I would also like to add. This is just my opinion. I know ppl are saying to follow the lines but because of the fish eye effect, the angle will skew the farther the line goes. I would suggest to align it with the first 1-2 feet of your front view. This will make a lot of sense once you view it from the birds eye view angle or as a whole. Good luck!!!!

In the file that @Delta1Seven posted on the previous page, the manual section gives the distances from the truck that the lines need to be calibrated to. This will also affect the pedestrian detection.

(here: https://www.tacoma4g.com/forum/threads/heritage-grill-camera-swap-observations.6132/post-137413)

 

[Castiglione]

In the file that @Delta1Seven posted on the previous page, the manual section gives the distances from the truck that the lines need to be calibrated to. This will also affect the pedestrian detection.

(here: https://www.tacoma4g.com/forum/threads/heritage-grill-camera-swap-observations.6132/post-137413)

Someone’s gonna have to dumb it down because it feels like im reading a rocket ship manual. +165 will do for now

**can’t figure out how to make the cross markers appear

 

[Yotota]

Someone’s gonna have to dumb it down because it feels like im reading a rocket ship manual. +165 will do for now

I can't argue there... They don't make it easy!

It's a bunch of lines around the truck, and some X's off the corners. I plan to stick a bunch of blue painters tape on my shop floor based on those dimensions.

Sponsored