I want MPGs BY TANK to display, can’t figure it out?

[Tsturbo]

2024 Limited Hybrid, currently running in “comfort” mode. I have gone through all the different set up’s and canned figure out how to get it to display MPG’s per tank. Any help appreciated!

Sponsored

 

[Sagebrush]

I zero out the MPG when I fill up.

 

[SilverSurfer]

I can appreciate wanting that. It used to be so easy and now it’s buried behind digital menus. I was looking for a reset the other day and gave up. I’ll be waiting until my next fill up to start over. It’s not the end of the world, since it’s a truck, I don’t exactly have high expectations.

 

[Tsturbo]

I zero out the MPG when I fill up.

So, assuming this is by Tank? And if so, what are your settings to get this?

 

[Sagebrush]

So, assuming this is by Tank?

I can keep track of how the last fillup is doing using this methoc. But I use the Fuelly app to keep track of all my fillups and maintenance.

 

[HoptownBob]

Took me a little time to figure out how to do it.
After tank fill up ….
1. Vehicle info on your display
2. Trip information
3. History
4. Tap tap Update
Your previous Average MPG will move to the left and your new Average MPG will start to the right. This will also reset your Total Average setting in your instrument cluster. The pictures are a little misleading because the MPG numbers are different, but that because I was sitting in the truck in the driveway, with it running and the MPG was changing, both the places will show the same MPG. Do this at each fillup. If you tap Clear
All - All your data will be cleared and it will start over. I don’t see a need to ever do that.
Total Average is total since you tapped Update.

 

[Dansflhti]

Took me a little time to figure out how to do it.
After tank fill up ….
1. Vehicle info on your display
2. Trip information
3. History
4. Tap tap Update
Your previous Average MPG will move to the left and your new Average MPG will start to the right. This will also reset your Total Average setting in your instrument cluster. The pictures are a little misleading because the MPG numbers are different, but that because I was sitting in the truck in the driveway, with it running and the MPG was changing, both the places will show the same MPG. Do this at each fillup. If you tap Clear
All - All your data will be cleared and it will start over. I don’t see a need to ever do that.
Total Average is total since you tapped Update.

My truck does not display the previous best. It always reads 0.00. I've commented on this before but still havent found the reason.

 

[HoptownBob]

Are you tapping Update “not clear data”?
That it the only thing that I can think of that would do that. It will only show previous best after you tap update and a new bar starts the right of the current one.

 

[Dataman]

I would just love to have displayed the traditional analog "meter" display of how much gas is in my tank. I have noticed that the current display of how many miles left in my tank changes seemingly dependent on current mpg average.

 

[Baltimore]

Why not just dedicate one of your two trip counters to the tank? And reset that one each fill up. That's how I've always done it and I suspect how they are assuming you'll do it.

How often do you really need two other trip counters at the same time?

 

[soupy1234]

I would just love to have displayed the traditional analog "meter" display of how much gas is in my tank. I have noticed that the current display of how many miles left in my tank changes seemingly dependent on current mpg average.

There's a bar meter under the DTE number. On mine it has been fairly accurate (fill up at quarter-tank is ~13.5 gal). I just treat the DTE as entertainment.
Wouldn't mind if there were a way to hide it. Maybe a piece of black tape?

I do miss the dial gauge on my 2013. The graduations were 1 gallon and it was really accurate.

 

[Dansflhti]

Are you tapping Update “not clear data”?
That it the only thing that I can think of that would do that. It will only show previous best after you tap update and a new bar starts the right of the current one.

Every fill up..I tap update.

 

[HoptownBob]

Yep, I see that you are. Not sure why you’re not getting the previous best. May a call to connect services and they should be able to get you to the right person to talk to. I fought a dealership would be able to help, apparently some of them don’t even know that a 14” screen is available
Just to see if we can figure this out:
Do you have the Total Average MPG as one of your instrument clusters display, like I do in my pictures? I’m just thinking if you don’t maybe that is keeping it from showing up.

 

[Bluznvice]

Every fill up..I tap update.

That's awesome! I never made it that far in the manual.

 

[Dansflhti]

Yep, I see that you are. Not sure why you’re not getting the previous best. May a call to connect services and they should be able to get you to the right person to talk to. I fought a dealership would be able to help, apparently some of them don’t even know that a 14” screen is available
Just to see if we can figure this out:
Do you have the Total Average MPG as one of your instrument clusters display, like I do in my pictures? I’m just thinking if you don’t maybe that is keeping it from showing up.

I don't have Total Average as one of my options. I'll enable that this weekend and see what happens.

Sponsored